Question:
Does Versa support WAN and LAN on a single interface?
Solution:
Versa supports a single interface for LAN and WAN, through workflows. Follow these steps to enable WAN and LAN on a single interface:
  1. Login to Versa Director.
  2. Select Director Context > Workflows > SDWAN > Create Template and click + on the top right corner of the dashboard. This opens the Onboard Template window.
  3. Select the Interfaces tab in the Onboard Template window.
  4. Place your cursor on a port and click three times to change the port color to partially blue and partially green. Refer to port 4 in the image.

The port vni-0/3 in the image is present on both WAN and LAN sides. 

 This enables the WAN and LAN on a single interface.


NOTE: You can add multiple sub-interfaces on the same port on both WAN and LAN sides.