How to Configure Virtual Router on Internet/MPLS Router for Internet Access.

This Article describes how to Configure Virtual Router on Internet/MPLS Router for Internet Access.

We have to follow the below process for configuring and accessing Internet on

STEP:1 Configuration on Router:

Add one New interface on Intermediate Router which is connected to sw0.

STEP:2 Add New Interface vni-0/3

10.192.162.140/16 : will be the Public IP.

STEP: 3 Add Network with vni-0/3 interface.

STEP: 4 Add cgnat services in default-sng.

STEP: 5 Create a Virtual Router:

STEP: 6 Configure the Organization Limits under Configuration > Other > Organization > Limits.

Click on the org name and add the Interface, networks, owned routing instance and available routing instance and services.

STEP:7 Create a zone and add the Network.

STEP: 8 Configure CGNAT

Add a NAT pool and create a Rule

10.192.162.140: vni-0/3 Interface IP with CIDR 32.

STEP:9 Check the Ping on PC and CPE (Connected towards PC via LAN-VR).

From CPE to PC -

From PC to CPE -