This article shows How to convert management port to WAN port on Advantech V1010 in 16.1R2 and 20.2.x


cid:image005.png@01D53AF4.0A59B4A0 



In 20.2.2

1. In flexvnf CLI, use the CLI command to configure mgmt port as data port or shared port.



In 16.1R2

Configuration : 

  1. Edit vsboot.conf file


https://attachment.freshdesk.com/inline/attachment?token=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpZCI6MjMwMDcxNDM4NzQsImRvbWFpbiI6InZlcnNhbmV0d29ya3MuZnJlc2hkZXNrLmNvbSIsImFjY291bnRfaWQiOjU0NjUxNn0.gbY6NSfpfp6WwuWaG7bMiUo_tNq4yiqtoGqw5oPvHN8   

 

  1. Remove eth0 from avoid


https://attachment.freshdesk.com/inline/attachment?token=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpZCI6MjMwMDcxNDM4ODIsImRvbWFpbiI6InZlcnNhbmV0d29ya3MuZnJlc2hkZXNrLmNvbSIsImFjY291bnRfaWQiOjU0NjUxNn0.MpCvVt_ZAO3iUZUeEWPGnAfI1OPHsDQ3sTTjdVZi7Ts


  1. After removing eth0 , save the file (:wq!)


https://attachment.freshdesk.com/inline/attachment?token=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpZCI6MjMwMDcxNDM5MDEsImRvbWFpbiI6InZlcnNhbmV0d29ya3MuZnJlc2hkZXNrLmNvbSIsImFjY291bnRfaWQiOjU0NjUxNn0.YN98TK7o0dRoRJtKc9schgks8lAioZxq-0b05AN7fFQ


  1. After saving the file ,do vsh restart,


https://attachment.freshdesk.com/inline/attachment?token=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpZCI6MjMwMDcxNDM5MDMsImRvbWFpbiI6InZlcnNhbmV0d29ya3MuZnJlc2hkZXNrLmNvbSIsImFjY291bnRfaWQiOjU0NjUxNn0.IVYQR1f-fnLROGoeFk-Dle5UhvEK0151hLrIimFMuqs


  1. Interface details before making the above changes

 

            

              After converting the Management port to Wan port, vni-0/3 interface is added as shown in below screenshot